TVS 1900/Meth Dyno 600 +
10-26-2013, 03:01 PM
#1
TVS 1900/Meth Dyno 600 +
SilveradoTVS 1900 600+Rwhp Dyno @ Baker Engineering - YouTube
Went to see my bud TJ up at Baker engineering for some dyno tuning ,
Added a small pulley (2.5 ), Alky control meth , and cutout since last dyno session last year. Previous best was 562 Rwhp @12psi.
She made 627rwhp and 614tq in 2nd gear locked and 20" wheels on the dyno jet. Made 15 psi. ! Little 1900 is screaming
AFR is nice @ 11.2 . I think a locked pull in third would give me an honest 650@ the wheels .
03sierraSLT came along for the ride as well and helped get my alky meth kit setup properly , glad he came ! Awesome time and good beer was drank too !
Saw lots of cool stuff at baker, fun trip as always. .
Not big 800-1000hp numbers but man this truck is a blast to drive and a complete beast.
Went to see my bud TJ up at Baker engineering for some dyno tuning ,
Added a small pulley (2.5 ), Alky control meth , and cutout since last dyno session last year. Previous best was 562 Rwhp @12psi.
She made 627rwhp and 614tq in 2nd gear locked and 20" wheels on the dyno jet. Made 15 psi. ! Little 1900 is screaming
AFR is nice @ 11.2 . I think a locked pull in third would give me an honest 650@ the wheels .03sierraSLT came along for the ride as well and helped get my alky meth kit setup properly , glad he came ! Awesome time and good beer was drank too !
Saw lots of cool stuff at baker, fun trip as always. .
Not big 800-1000hp numbers but man this truck is a blast to drive and a complete beast.
Last edited by TIM Z; 10-28-2013 at 03:37 PM. Reason: Added dyno sheet
10-26-2013, 04:20 PM
#6
Turn it up more? If he gets any smaller of a blower pulley he will have to just cog the shaft and not run a pulley. I am calling that 1900 maxed, she runs good. I left some rubber in Michigan on the way home since Tim was dragging *** a bit this morning. You can't beat the drivability and always on tap tq of a TVS.
Trending Topics
10-26-2013, 04:23 PM
#8
Turn it up more? If he gets any smaller of a blower pulley he will have to just cog the shaft and not run a pulley. I am calling that 1900 maxed, she runs good. I left some rubber in Michigan on the way home since Tim was dragging *** a bit this morning. You can't beat the drivability and always on tap tq of a TVS.
5.3 don't do so hot in the torque department
10-26-2013, 05:13 PM
#9
Thanks guys ! I should say also the Leftcoast 8 rib drive is working great , zero slip with my tiny pulley lol.
Man I think the same thing only I'd like to have a turbo setup also one of each would be nice 
But yeah like Pat said my blower is maxed out . I would need a larger 2300 to get up to the levels the turbo guys can see , maybe a whipple 4.0
But she's done and very fun.
one of each would be nice But yeah like Pat said my blower is maxed out . I would need a larger 2300 to get up to the levels the turbo guys can see , maybe a whipple 4.0
But she's done and very fun.
